![]() If configured, when you enter the reverse gear, the xcarlink will automatically switch the screen to and from the rear camera RCA signal. It also is able to read the canbus and grab data like gear selection and steering angle for the backup camera. The xcarlink goes between the 'head unit' and the iDrive display and acts as a pass-through. The concept is to use a module called xcarlink which is essentially a receiver for the car. ![]() I'd recommend referencing one of the several other CCC videos floating around youtube for help in that area. ![]() There may be some exceptions, particularly related to the backup camera as well as the labels on the box and perhaps some of the canbus wiring for CCC modules. Everything I explain here will be regarding the CIC because I have not done this with CCC before, although I know most of this should still apply to CCC cars. For the backup camera only method, click here. If you want just the gauges or just the backup camera, there is are better and less expensive ways to do this. There are several ways to do this, particularly if you have CIC, but due to wanting a backup camera as well as integration with the stock iDrive menus and not wanting an external device showing, I chose this method as it seemed the most OEM.
0 Comments
Leave a Reply. |